The MZ5VTTL is a completely in house project. We wanted to see if we could control a lighting system with the MZRS232. We were able to do it with an RS232 to X10 converter. After some thought we realized that it would not be practical to purchase a converter for each switch. The MZRS232 was redesigned to have TTL level outputs instead of true RS232 level outputs. We then built a small circuit board that would allow these TTL level signals to be combined and came up with the TTLCMB1 . The only difference between the MZ5VTTL and the MZRS232 is the output driver.

The MZ5VTTL was built to experiment with X10 signalling. It can still be programmed with MZSOFT . MZSOFT can be downloaded and distributed at no charge. The Manual can be downloaded by clicking DOWNLOAD MANUAL HERE.

The switch can be ordered as a kit containing the main board, cover plate, rubber inlay, power supply, programming cable and programming CD. It can also be purchased as just the working circuit board. This is a good choice if you just want to try it out.

Please note contact us for order information. Single quantities are $29.95 per kit.